Dell PowerEdge 6400 Podręcznik - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik dla Przełącznik Dell PowerEdge 6400. Dell PowerEdge 6400 10 stron. Wake-on-lan (wol) support on dell servers
Również dla Dell PowerEdge 6400: Instalacja stojaka (37 strony), Instrukcja instalacji aktualizacji (42 strony), Instalacja stojaka (34 strony), Instrukcja instalacji (42 strony), Instrukcja instalacji (37 strony), Instalacja (4 strony), Montaż i instalacja (32 strony), Podręcznik (10 strony), Podręcznik (15 strony)

SCSI Backplane Option

Ultra3 SCSI cable connector (SCSIA)

Ultra3 SCSI cable connector (SCSIB)

Cooling fan power cable connector (FAN)

Power connector (POWER)

System-board data cable connector (PLANAR)

13. Connect the power cable labeled "HD-B/P" to the connector labeled "POWER" on

the backplane board.

14. Connect a SCSI cable from the connector labeled "SCSIA" on the backplane board

to the connector labeled "PRIMARY SCSIA" on the system board, or to a SCSI

host adapter card.

15. If you want to operate the backplane in a split 2 x 4 configuration, connect a SCSI

cable from the connector labeled "SCSIB" on the backplane board to the second

Ultra3 SCSI connector on the system board, or to a SCSI host adapter card.

NOTES: When the 2 x 4 SCSI backplane is cabled to two SCSI host adapter

cards, the SCSI host adapter cabled to the 2 x 4 backplane's SCSIA connector will

control the four top hard-disk drives of a rack-mounted system (or the four left-

most hard-disk drives of an upright free-standing system) with SCSI IDs 0, 1, 2,

and 3; and will control the four bottom hard-disk drives of a rack-mounted system

(or the four rightmost hard-disk drives of an upright free-standing system) with

SCSI IDs 4, 5, 8, and 9.