Dell R1-2401 Podręcznik dla początkujących - Strona 16

Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla Przełącznik Dell R1-2401. Dell R1-2401 30 stron. Poweredge vrtx switch modules
Również dla Dell R1-2401: Podręcznik dla początkujących (20 strony)

Drukuj stronę
Dell R1-2401 Podręcznik dla początkujących
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
The Telnet session begins.

Retrieving an IP Address

By default, the switch receives its IP address dynamically via a DHCP server.
You can change the OOB port's IP , but you cannot delete it. and you can add
another IP address on the In-Band interface (port, port-channel or VLAN).
The In-Band IP address can also be received from the DHCP server.
Receiving an In-Band IP Address from a DHCP Server
When using the DHCP protocol to retrieve an IP address, the device acts as a
DHCP client. When the device is reset, the DHCP command is saved in the
configuration file, but the IP address is not.
To retrieve an IP address from a DHCP server, perform the following steps:
1 Select and connect any port to a DHCP server or to a subnet that has a
DHCP server on it.
2 Type the following commands to use the selected port for receiving the IP
address:
Assigning dynamic IP Addresses on a port:
a
console# configure
console(config)# interface gi0/1
console(config-if)# ip address dhcp
Assigning a dynamic IP Addresses on a VLAN:
b
console# configure
console(config)# interface vlan 1
console(config-if)# ip address dhcp
The interface receives the IP address automatically.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 3 / 6 / 1 3 - F O R P R O O F O N LY
16
Using the CLI
Plasma\GSG\Plasma_UGUsing_CLI.fm