Dell S6100 Informacje o wersji - Strona 5
Przeglądaj online lub pobierz pdf Informacje o wersji dla Przełącznik Dell S6100. Dell S6100 13 stron.
Upgrading the ONIE/DIAG/BIOS/CPLD Package for the S6100–ON
To upgrade the ONIE package you have installed, use one of the following two processes: zero touch
(dynamic) update and manual update.
1.
Zero Touch (Dynamic) Update Process
2.
Copy the upgrade ONIE installer and the DIAG installer for your system to the TFTP/HTTP server.
3.
Configure a DHCP server and set option 2, Updater URL.
4.
Select ONIE: Update ONIE from the ONIE boot menu. ONIE Update uses ONIE Service Discovery
to obtain the onie-updater image. The Discovery methods are used in this order:
a.
passed from boot loader
b.
local file system (for example, USB storage)
c.
specific URL from DHCPv4
d.
other URLs from DHCPv4
e.
IPv6 neighbors
f.
TFTP waterfall
5.
Manual Update Process
The following is an example of manually updating ONIE.
Make sure onie-boot-mode is set to Update mode before proceeding to self-update.onie Boot
mode.
You can set Update mode in two ways:
•
Use the onie-boot-mode —o update command.
•
Select ONIE: update ONIE from the ONIE menu.
To update your existing ONIE image, boot into ONIE Update mode and run the following command.
The example uses TFTP to upgrade ONIE.
Manually upgrade ONIE using the onie-self-update command.
ONIE:/ # onie-self-update tftp://<tftp-server-ip>/<onie-updater-image-path>/
<onie-updater-image>
100_c2538-r0
discover: ONIE update mode detected.
Stopping: discover... done.
Info: Fetching tftp://x.x.x.x/sm/s6100/onie-updater-x86_64-dell_s6100_c2538-
r0 ...
sm/s6100/onie-update 100% |*******************************|
ETA
ONIE: Executing installer: tftp://x.x.x.x/sm/s6100/onie-updater-x86_64-
dell_s6100_c2538-r0
Verifying image checksum ... OK.
Preparing image archive ... OK.
ONIE: Version
ONIE: Architecture
ONIE: Machine
ONIE: Machine Rev
ONIE: Config Version: 1
Installing ONIE on: /dev/sda
Rebooting...
ONIE:/ # discover: ONIE update mode detected.
Stopping: discover...start-stop-daemon: warning: killing process 281: No
Dell Release Notes for the S6100–ON System
: 3.25.1.2
: x86_64
: dell_s6100_c2538
: 0
8561k
0:00:00
5