Allied Telesis AT-PWR4 Instrukcja instalacji - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Zasilanie Allied Telesis AT-PWR4. Allied Telesis AT-PWR4 2 stron. Auxiliary power supply for at-mcr12
Również dla Allied Telesis AT-PWR4: Instrukcja instalacji (2 strony)
Drukuj stronę
Warranty Registration
Allied Telesis hardware products are covered under limited warranties. Some products
have a longer warranty coverage than others.
This AT-PWR9 power supply has a limited warranty of 5 years.
All Allied Telesis warranties are subject to the terms and conditions set out on the Allied
Telesis website at www.alliedtelesis.com/warranty.
Specifications
Physical Characteristics
Dimensions (H x W x L)
225 mm x 61 mm x 120 mm
(8.9 in x 2.4 in x 4.7 in)
Weight
0.77 kg (1.7 lbs)
Operating Temperature
0° C to 40° C (32° F to 104° F)
Storage Temperature
-25° C to 70° C (-13° F to 158° F)
Operating Relative Humidity
5% to 90% RH (non-condensing)
Storage Relative Humidity
5% to 95% RH (non-condensing)
Power Requirements
Power Rating
100-120 VAC, 50/60 HZ, 3.0 A
220-240 VAC, 50/60 HZ, 1.5 A
Agency Certifications
Electrical Safety
UL60950-1 (
UL
), EN60950-1 (TUV),
c
us
CSA 950
Immunity
EN50082-1
Emmission
EN55022-1 Class A
Electrical, Safety, and Emissions Statements
This product meets the following standards.
U.S. Federal Communications Commission
Radiated Energy
Note: This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with this instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
Note: Modifications or changes not expressly approved of by the manufacturer or the FCC, can void
your right to operate this equipment.
Industry Canada
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
Copyright © 2007 Allied Telesis, Inc. All rights reserved. No part of this publication may
be reproduced without prior written permission from Allied Telesis, Inc.
4
5
6