3 Legged thing Evo 3 Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria do kamer 3 Legged thing Evo 3. 3 Legged thing Evo 3 12 stron. Tripod & airhed

AirHeds and Release Plates

Evolution 3 AirHeds have a circular clamp design,

to make them easier to stow when counterfolding

the legs. There are two basic clamp types - Pano &

Standard. Both clamps have a locking knob( a) for

releasing the Peak Design Compatible Quick Release

Plate. The Pano-Clamp also has a copper knob (b)

which locks and unlocks the panning function.

The new release plate (c) is designed to be compatible

with all Peak Design Capture products. Refer to your

Peak Design instruction manual and warranty for uses

and limitations.

Once you have attached your new Peak Design

Compatible QR3P Plate to your camera, with the

included tool, mount your camera leaving the bubble

level visible, testing before letting go. NEVER undo any

of the knobs without holding your camera.

If your head has both black and copper knobs on the

clamp, it can pan from both the clamp and the base,

enabling seemless, flat panning for video and tracking.

The casing has two knobs - a smaller pan lock (unseen

in the images opposite) for the base, and a large ball

lock (d) which is the main locking control.