EarthQuake MiniMe P12 Podręcznik użytkownika - Strona 10
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Subwoofer EarthQuake MiniMe P12. EarthQuake MiniMe P12 16 stron. Earthquake sound subwoofers user's manual
![EarthQuake MiniMe P12 Podręcznik użytkownika](/uploads/products/server2/325230/325230.jpg)
System Configurations
The following pages show some typical connections
that you might make in your installation. They show
how the inputs and outputs of the Earthquake sub are
connected to your pre-amplifier or receiver.
Connections to a pre-amplifier's
subwoofer output
If your pre-amplifier has a subwoofer output (often
labeled LFE for Low Frequency Effects), it can be
connected to the subwoofer's Left (Mono) input as
shown. This is the simplest and recommended
connection. A receiver with a sub/LFE output can be
connected in the same way.
The subwoofer will play the low frequency range and
the other speaker will play the frequency range
delivered to them by your amplifier.
If you have a home theater pre-amplifier, it may have
an independent subwoofer volume control. Make sure
this is correctly adjusted, and that the Earthquake
subwoofer's crossover frequency is set to 100Hz. This
is by no means an iron-clad rule, rather it is a good
starting point.
You can set the subwoofer's Bass Level control on
your receiver to 0dB, and then use the pre-amplifier's
subwoofer level control for normal and routine
adjustments.
Earthquake • MiniMe User Manual
600 WATTS
POWERED
SUBWOOFER
DIGITAL
P O W E R
WARNING
TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: SHOCK HAZARD-DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
PRE-AMPLIFIER
SUB/LFE OUT
AMPLIFIER
L
INPUTS
10
LEFT
RIGHT
VOLUME
POWER
MIN
MAX
FREQUENCY
50Hz
160Hz
MODE
SUB
LFE
PHASE
0
180
AUTO
OFF
ON
110-120VAC~60Hz
220-240VAX~50Hz
ON
110-120V
FUSE
220-240V
OFF
FUSE: 115V, T6.4AL/250V
FUSE: 230V, T3.2AL/250V
www.earthquakesound.com
Earthquake Sound, 2727 McCone Avenue, Hayward, CA 94545 USA
L
R
MAIN
OUTPUTS
+
-
+
-
R
TO FRONT SPEAKERS