AWA BDU125K Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przenośny odtwarzacz DVD AWA BDU125K. AWA BDU125K 7 stron. Dvd/cd player with stereo radio usb port & sd/mmc card and remote control

Drukuj stronę

RADIO OPERATION

TO PLAY THE RADIO

1. Slide the FUNCTION switch to the RADIO position, the POWER Indicator will light up.

2. Select the desired band with the BAND switch.

3. Tune to the desired station by rotating the TUNING control (Move the control back and forth until you get the strongest clearest

sound).

4. The built-in AM antenna and external FM TELESCOPIC ANTENNA are directional.

When receiving an FM broadcast, fully extend the TELESCOPIC ANTENNA and position for the best reception.

For AM broadcasts, rotate the whole set until the best reception is heard.

5. Adjust the volume level to a comfortable listening level.

6. To turn off the radio, adjust the FUNCTION control to OFF position.

NOTES:

If a particular FM (STEREO) station is weak, or you hear too much background noise, try moving the position of the band

selector switch to the FM (MONO) position. This can often result in a much clearer reception.

When the band selector switch is set to FM STEREO and a stereo broadcast is being received, the FM STEREO indicator on

the top of the unit will be lit.

STEREO HEADPHONE JACK

A stereo headphone jack has been provided on the top of the unit so that you can listen to the unit without disturbing others. To use this

jack, plug in the headphones/earphones (not included) and adjust the VOLUME control to a comfortable listening level.

NOTE: When external headphones/earphones are connected, the sound to the unit's main speakers will be muted.

Caution: Listening at high power for a long moment could damage users' ears.

MIC AND MIC LEVEL CONTROL

Connect the Microphone to MIC jack. Then adjust the MIC volume to proper level that you want. (Only works in DVD and USB

modes)

AUDIO IN

Your player can be used as a power amplifier to playback the programs from portable radio, TV set or MP3 player or whatever

provided this appliance is so designed that audio signal may be produced through a LINE-OUT jack or the like.

Observe the following steps to connect the player to another appliance:

1. Power the player on using the supplied AC Power Cord.

2. Slide Function Switch to AUDIO IN position.

3. Connect the appliance into the player's AUDIO in socket with the supplied LINE OUT cable of the appliance.

4. Power on the appliance and begin play.

Easy job, right? At this time you will be able to hear the sound produced from the programs the connected appliance is

Broadcasting.

DISC HANDLING PRECAUTIONS

Hold the disc by the edge so the surface will not be soiled with finger prints. Finger prints, dirt and scratches can

cause skipping and distortion.

Do not write on the label side with a ball-point pen or other writing utensils.

Do not apply benzine, thinner, and liquid that prevents against static electricity.

Be careful not to drop or bend the disc.

Instal only one disc on the disc tray.

Do not try to close the disc tray when the disc is not in stalled properly.

Be sure to store the disc in it's case when not in use.