EarthQuake 9800B Instrukcja obsługi i części - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi i części dla Sprzęt do trawników i ogrodów EarthQuake 9800B. EarthQuake 9800B 13 stron. Two-man earth auger powerhead
Również dla EarthQuake 9800B: Instrukcja obsługi (20 strony)

Drukuj stronę

EarthQuake 9800B Instrukcja obsługi i części

MAINTENANCE AND STORAGE

CAUTION

To prevent accidental starting:

Engine must be turned off and cool, and spark plug

wire must be removed from spark plug before

checking and adjusting engine or equipment.

MAINTENANCE AND STORAGE SAFETY

MAINTENANCE AND ST

ORAGE SAFETY

1. Always allow muffler to cool before filling fuel tank.

2. When storing for over one (1) month, use gas

stabilizer in fuel.

3. Do not fill gas tank indoors or when engine is running

or is hot.

4. The gear case has four (4) oz. of grease installed at

the factory. It is recommended that once a year the gear

case be split and the grease level checked. Add grease

only if level of grease is below top of the gears. DO NOT

OVERFILL.

5. For cold weather operation, store the unit in a cool

environment. Transferring the unit from a warm to a cold

place can cause the build up of harmful condensation.

Page 6

ORAGE SAFETY

ENGINE MAINTENANCE

CAUTION

Do not operate auger before reading the engine

manual provided in the parts packet.

Engine can overheat and become damaged if de-

bris blocks the cooling fins or recoil housing.

Refer to the engine manual included in your parts packet

for information on engine maintenance. Your engine

manual provides detailed information and a maintenance

schedule for performing the following tasks:

1. Check oil level every five (5) operating hours and

before each use.

2. Change oil after first two (2) operating hours and

every 25 operating hours thereafter, more often if

operated in extremely dusty or dirty conditions. Change

oil while engine is still warm from recent running.

3. Frequently remove dirt and debris from cooling fins,

air intake screen, levers and linkage. This will help ensure

adequate cooling and correct engine speed.

4. Check air cleaner.

Never run engine without complete air cleaner

installed on engine.

5. Check spark plug yearly or every 100 operating hours.

6. Check engine and auger often for loose nuts and

bolts.

ARDISAM

.com

800-345-6007