EarthQuake 9800BCE Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt do trawników i ogrodów EarthQuake 9800BCE. EarthQuake 9800BCE 20 stron. Two-man earth auger powerhead
Również dla EarthQuake 9800BCE: Instrukcja obsługi (19 strony)

Drukuj stronę

ASSEMBLY

UNPACK POWERHEAD
1. Carefully lift the powerhead out of the box, remove any
packing material and cut any ties.
TOOLS REQUIRED
• Two (2) 9/16" Wrenches
ASSEMBLY INSTRUCTIONS (SEE FIGURE 1)
1. Insert the output shaft of the transmission in the open end
of the Flex Coil Shock Top.
2. Line up the bolt holes through the Flex Coil Shock Top and
the output shaft of the transmission.
3. Place the included 3/8-16 x 1.5 inch bolt through the bolt hole.
4. Hand-thread the 3/8-16 "Bi-way" locknut on the bolt.
5. Using two 9/16 inch wrenches, securely tighten the nut and bolt.
8
Two-Man Earth Auger Powerhead 9800 Series
3/8-16 bi-way
FIGURE 1
Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5
transmission
output shaft
locknut
Operator's Manual
3/8-16 x 1.5 inch bolt
flex coil shock top