Allied Vision Goldeye G Series Skrócona instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Kamera IP Allied Vision Goldeye G Series. Allied Vision Goldeye G Series 17 stron.

Installing a Gigabit Ethernet network card

If your host computer has an available Ethernet interface, this can be used with

Allied Vision GigE cameras. We recommend that your camera system uses a

dedicated Ethernet interface not shared with Internet or local area networks. If

more interfaces are needed, or your existing Ethernet adapter is unable to

operate at Gigabit Ethernet speeds, installing additional hardware may be

required.

• For desktop systems, use a PCI Express bus Ethernet adapter.

• For laptops, use an expansion slot via an Express Card.

Configuring Ethernet adapter

Install the network card driver from your network card manufacturer.

Read the frame grabber software installation guide provided by the frame

grabber manufacturer.

Modifying Ethernet adapter IP address

After Ethernet adapter hardware installation, connect the Ethernet adapter

directly to the camera. The default configuration assigns an IP address

automatically, using the Link-Local Address range of 169.254.xxx.xxx.