EarthWay 2170T Instrukcja montażu i obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja montażu i obsługi dla Rozrzutnik EarthWay 2170T. EarthWay 2170T 6 stron. Commercial tow
broadcast spreader
Również dla EarthWay 2170T: Instrukcja montażu i obsługi (6 strony)
Drukuj stronę
Lower
Handle
Frame
Brace
Cross Brace
7. Slide axle bushing over axle and into axle bearing to both sides as shown.
8. Install drive wheel to axle using pin hole nearest to lower handles as shown.
Insert 2" cotter pin through wheel and through axle. Bend with pliers to
prevent pin from falling out.
9. Install coast wheel to axle using outside pin hole. As shown, insert 1" cotter pin through axle (not thru the wheel). Bend with pliers to
prevent pin from falling out.
10. Insert pivot rod into shut off plate as shown. Turn to lock in place.
11. Insert other end of pivot rod into pivot and bracket assembly as shown. Turn to lock in place.
12. Install Control Support between lower handles as shown inserting (2) 1-3/4" bolts thru the Pivot Bracket and the Lower Handles and
secure with (2) lock nuts. Next, line up the hole in the Cross Brace with the hole in the Control Support. Insert 1-4-20 X 2-1/4" bolt
through the Control Support and thru the hole in the Cross Brace, secure with a 1/4-20 lock nut. Now determine if you want to add the
Hitch Extension to the Control Support and install the Hitch Plates with a 1/4-20 X 1-3/4" bolt and secure with a 1/4-20 lock nut.
13. Attach Gauge & Lever assembly to Control Support using (2) 1/4-20 X 1-1/2" bolts and (2) 1/4-20 lock nuts and T
Gearbox
Axle Assembly
TURN SPREADER UPRIGHT ON TO WHEELS.
1/4 - 20
Lock Nut
1/4 - 20
Lock Nut
1/4 X 1-1/2"
Hex Head Bolt
1/4 X 1-3/4"
Hex Head Bolt
1/4 X 2-1/4"
Hex Head Bolt
1/4 - 20
Lock Nut
1" Cotter Pin
Shut-Off
Plate
Pivot Rod
with extra bend
1/4 X 1-3/4"
Hex Head Bolt
Hitch Plates
1/4 - 20
Lock Nut
Hitch Extension
2" Cotter Pin
ighTen
Rotate
Pivot
PAGE 3