EarthWay C25HD Instrukcja montażu i obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja montażu i obsługi dla Sprzęt do trawników i ogrodów EarthWay C25HD. EarthWay C25HD 4 stron. Tow broadcast spreaders

Drukuj stronę

C25 Series

Tow Broadcast Spreader

Assembly/Owners Manual

Assembly continued

Step 4: Place the drive wheel (either wheel can be

used) on the axle and secure with the long

cotter pin and bend. (NOTE: Drive wheel

side has the cross-hole in the axle closest to

the frame as shown) Fig 1

Step 5: Place the coast wheel on the axle and secure

with the short cotter pin and bend. (NOTE:

Coast wheel side has the cross-hole in the

axle closest to the end of the axle) Fig 2

Step 6: Turn the spreader over on to the wheels

Step 7: Remove the 2 bolts from the control support

frame as shown, and then slide the control

support between the support frame rails and

re-insert the bolts and tighten. Fig 3 & 4

Step 8: Attach control linkage to control lever and

linkage pivot as shown. Fig 5

Step 9: Install adjustable hitch. Fig 6

Step 11: Adjust hitch to level the spreader when attached to your tractor.

TIP: After your spreader is attached to your tractor and it is on a level surface, adjust the hitch

so that the impeller is tipped up slightly at the rear for best performance.