Miele W 906 Instrukcja obsługi - Strona 29

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Spryskiwacz Miele W 906. Miele W 906 48 stron.

Drukuj stronę

Problem solving guide

Repair work to electrical appliances should only be carried out by a suitably

qualified person in accordance with local and national regulations.

Unauthorised repairs could be dangerous.

What to do if . . .

. . . the programme does

not begin:

. . . the "Check water inlet /

outlet" indicator lights are

flashing:

Cause . . .

There is no power.

The "ON" indicator light has not

lit up.

There is power and the "ON"

indicator is lit up, but the

programme selector has not

been turned to the "Finish /

Start" position.

The water inlet is blocked.

The "Check water inlet" light is

flashing, but the programme

has run normally.

The water inlet system is

blocked.

The "Check water inlet" light is

flashing, and the "Finish" light is

on in the display sequence, but

the load in the machine has not

been washed.

The water outlet is blocked.

The "Check water outlet" light is

flashing.

Problem solving guide

Remedy . . .

Check that:

–

the door is properly closed.

–

the plug is plugged in, and

the socket switch is on.

–

the fuse or circuit breaker

has not tripped.

–

Turn the programme selector

to the "Finish / Start" position.

–

Select a programme.

–

The stopcock is not opened

far enough.

–

The inlet hose is kinked.

–

The water pressure is too

low. Call the Service dept.

–

Turn the programme selector

to "Finish / Start".

–

Open the stopcock.

–

Select a programme.

–

Clean the fluff filter and drain

pump.

–

Has the drain pump been

fitted too high? (max, drain

head 1 metre).