Allmand Night-Lite E Series Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt oświetleniowy Allmand Night-Lite E Series. Allmand Night-Lite E Series 20 stron. Portable light tower
Drukuj stronęE DANGER - Shut down equipment
before entering electrical compart-
ment.
Part No. 112153-1
Location: Control Panel Door (inside)
Qty: 1
E DANGER - Maintain safe distance
from power lines when raising light
tower.
Part No. 112153-2
E WARNING - Position outriggers and
lower jacks on a smooth, flat, and sta-
ble surface before raising light tower.
Part No. 112153-3
F Electrical Specs
Part No. 112158
Location: Control Box (right)
Qty: 1
G Power Outlet
Part No. 112154
Location: Control box (right)
Qty: 1
H Setup Instructions
Part No. 112171
Location: Control Box (top)
Qty: 1
I Light Tower Transport Alignment
Part No. 107459
Location: Control Box (top)
Qty: 1
6
DANGER
Entering electrical compartment
while equipment is in operation
will result in death or serious
injury.
Shut down equipment before
entering electrical compartment.
Parts &
Service
Contact your authorized dealer
or visit
www.allmand.com
or call
1-800-562-1373
DANGER
Entering electrical compartment
while equipment is in operation
will result in death or serious
injury.
Shut down equipment before
entering electrical compartment.
Parts &
Service
Contact your authorized dealer
or visit
www.allmand.com
or call
1-800-562-1373
DANGER
Contacting power lines when raising
light tower will result in death or serious
injury.
Keep light tower far away from power
lines.
DANGER
Entering electrical compartment
while equipment is in operation
will result in death or serious
injury.
Shut down equipment before
entering electrical compartment.
Parts &
Service
DANGER
Contact your authorized dealer
or visit
www.allmand.com
or call
1-800-562-1373
Contacting power lines when raising
light tower will result in death or serious
injury.
Keep light tower far away from power
lines.
WARNING
Raising light tower prior to positioning
outriggers and lowering jacks could
cause machine rollover resulting in
death or serious injury.
Position outriggers and lower jacks on a
stable surface before raising light tower.
60Hz
110V
15A
112158
112154
50mph (80km/h) max
www.allmand.com
DAN
Contacting power lin
light tower will result
injury.
WARNING
Keep light tower far
lines.
Raising light tower prior to positioning
outriggers and lowering jacks could
cause machine rollover resulting in
death or serious injury.
Position outriggers and lower jacks on a
stable surface before raising light tower.
112153
112171
112153