Miele PG 8050i Instrukcja instalacji - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Zmywarka Miele PG 8050i. Miele PG 8050i 20 stron. Professional dishwasher

^ Tape the bracket to the door panel to

hold it in place while the mounting

holes are being drilled.

^ Proceed to step "Drill pilot holes ...".

If the adjacent cabinetry (or

appliance) does not have drawers

and alignment to a drawer line is im-

possible:

^ Hang the bracket on the machine

door, without the templates, and

tighten the four locking screws on the

edges of the door panel.

^ Close the door.

^ Measure the distance from the

adjacent cabinet (or appliance) door

bottom to the bottom of the mounting

bracket (X).

^ Using measurement (X), draw a line

on the rear of the door panel (X)

inches up from the bottom.

^ Remove the bracket from the

machine door and place it on the rear

of the door panel so that:

– the bracket is centered left to

right,

and

– the bottom of the bracket is

aligned with the (X) line.

^ Tape the bracket to the door panel to

hold it in place while the mounting

holes are being drilled.

^ Drill pilot holes for the screws using a

3/32" (2.5 mm) bit.

^ Attach the bracket to the panel using

the 6 screws provided.

^ Remove the templates (if used).

The templates should be kept in

case you want to install a different

door panel on the dishwasher at a

later date.

Installation