Miele DA 1260 Instrukcja obsługi i instalacji - Strona 28

Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Okap wentylacyjny Miele DA 1260. Miele DA 1260 44 stron.
Również dla Miele DA 1260: Instrukcja obsługi i instalacji (48 strony), Instrukcja obsługi i instalacji (44 strony), Instrukcja obsługi i instalacji (44 strony)

Installation

Installation recommendations

– To achieve optimum vapor extraction,

the hood must be centered over the

cooktop, not to the side.

– The cooktop should be no wider than

the hood. Preferably, it should be

narrower for better extraction.

– The mounting area must be easily

accessible. The ventilation hood

should be easy to reach and

disassemble in case a service call is

necessary. This should be taken into

consideration when planning the

position of cabinetry, shelves,

ceilings or decorative elements in the

vicinity of the ventilation hood.

Protective film has been used to cover

all housing components attached to

stainless steel models. This will shield

them from any damage that may occur

during transport.

 Remove the grease filters from the

appliance and remove the protective

film from the frames of the grease

filters and the housing. The film can

be peeled off easily.

A deflector is installed in the rear of the

hood. Its position depends on operating

mode. During the vented mode, the air

is directed upwards and out of the

housing at the back. During the

recirculation mode, the opening is

closed and the air is directed forward

through the recirculation grille.