Miele DA 1867 Instrukcja obsługi i instalacji - Strona 25

Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Okap wentylacyjny Miele DA 1867. Miele DA 1867 36 stron.

Fitting the furniture front

There are several holes on the

appliance's vapour plate for securing

the front panel. A drilling template is

supplied for correct positioning.

 Open the vapour canopy.

 Pull the catch forwards for releasing

the canopy and then swing the

canopy upwards.

 Cut the drilling template for the front

panel to size and place it on the

reverse of the panel. Drill the

appropriate holes.

 Then screw the furniture panel to the

vapour canopy with suitable screws.

There are two adjustable brackets at

the top of the unit and an adjustable

trim at the bottom of the unit for setting

the unit depth T between 275 mm and

360 mm.

 Loosen the screws in the adjustable

brackets.

 Extend the brackets to dimension T.

 Tighten the screws up.

 Loosen the screws in the adjustable

trim.

 Adjust the trim to the required depth.

 Tighten the screws up.

 If the adjustable trim is too short,

unscrew it, turn it around and refit it

to use the longer side.

Installation