Miele DA 2390 EXT Instrukcja obsługi i instalacji - Strona 24

Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Okap wentylacyjny Miele DA 2390 EXT. Miele DA 2390 EXT 40 stron.

Cleaning and care

Changing a lamp

Use only the lamps specified for use

with this appliance.

Other lamps, e.g. halogen lamps,

may cause damage due to the high

generation of heat.

The lamps should be replaced with the

following:

Manufacturer ............................... EGLO

Lamp type .................................... GU10

Specification................................ 11427

Wattage ........................................... 3 W

ILCOS D Code...... DR-3-H-GU10-50/56

Alternatively, the following lamps can

be used:

Manufacturer ............................... EGLO

Lamp type .................................... GU10

Specification................................ 11511

Wattage ........................................... 5 W

ILCOS D Code...... DR-5-H-GU10-50/54

These lamps have a different luminosity.

Only use lamps of the same type in the

rangehood.

These lamps are available from Miele or

from specialist retailers.

 Switch off the fan and the lighting.

The lamps can get hot during use.

Allow the lamps to cool down for a

few minutes before changing them.

 Disconnect the rangehood from the

mains electrical supply before

replacing the lamps (see "Warning

and Safety instructions").

 Insert the lever supplied into the gap

between the lamp and the lamp

holder.

The lamp will then drop downwards.

 Grip the lamp, turn it anti-clockwise

and take it out.

 Screw the new lamp into the socket

and push it upwards. Please follow

the manufacturer's safety

instructions.