Miele DA 249 Instrukcja obsługi i instalacji - Strona 19
Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Okap wentylacyjny Miele DA 249. Miele DA 249 40 stron. Ventilation system
Również dla Miele DA 249: Podręcznik wymiarów (2 strony)
Drukuj stronę
Cleaning the grease filters
^ By hand: use a scrub brush with a
solution of warm water and mild
detergent.
Do not use the pure detergent,
aggressive all purpose cleaners,
oven sprays or limescale removers.
They could destroy the filters.
^ In a dishwasher: place the filters
vertically in the lower basket, making
sure that the spray arm is not blocked.
Use a wash program with a max.
temperature of 150°F (65°C). In a
Miele dishwasher use the "Normal"
program.
Use the recommended amount of
dishwasher detergent. Overuse could
destroy the filter.
Depending on the detergent,
cleaning the grease filter in a
dishwasher may cause permanent
discoloration of the filter surface.
Performance of the filter will not be
affected by this discoloration.
^ After cleaning, the filter can be
placed on a towel to air dry.
^ For cleaning the decor cover see
"Cleaning the casing".
^ While the filter is removed, clean any
dirt or grease from the filter casing to
prevent the risk of fire.
^ After returning the grease filter, press
the grease filter button for 3 seconds
to reset the timer.
The indicator light will go out.
Cleaning and Care
^ If the grease filter is cleaned before
the timer has reached its maximum,
the grease filter button should be
pressed for 6 seconds to reset the
counter to zero.
Inserting the grease filter
^ Angle the grease filter into position
toward the front of the hood.
^ Once the front edge of the filter is in
place, push up the rear of the filter so
that both sides click into place.
Inserting the decor cover
^ Hook the decor cover on to the
latches on the rear panel of the
chimney. Push the cover up at the
front so that it clicks in place.
19