Miele DA 3180 Instrukcja obsługi i instalacji - Strona 30

Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Okap wentylacyjny Miele DA 3180. Miele DA 3180 40 stron. Ventilation system
Również dla Miele DA 3180: Instrukcja obsługi i instalacji (36 strony), Instrukcja obsługi i instalacji (40 strony), Wymiary (1 strony), Instrukcja obsługi i instalacji (40 strony), Instrukcja obsługi i instalacji (40 strony)

If site conditions are not suitable for the

cooker hood to be used with air

extraction, the appliance must be set

up for recirculation.

For this, we recommend using the

conversion kit available from your Miele

dealer or the Miele Spare Parts Dept

(see "Technical data").

You will also need a charcoal filter (see

"Technical data").

^ Attach the ventilation ducting to the

underside of exhaust grille.

^ Then feed the ducting down into the

housing unit through the opening at

the top.

^ Secure the ducting over the exhaust

socket on the cooker hood using a

hose clip.

A non-return flap is not used in

recirculation mode.

^ Screw the exhaust grille to the top of

the unit.

When fitting the exhaust grille make

sure that the slats in the grille point

towards the centre of the room and

not directly towards a wall or the

ceiling.

^ Fit the charcoal filter (see "Cleaning

and care").

Refer to the notes in "Electrical

connection" and "Warning and

Safety instructions" before

connecting to the electricity supply.

^ For appliances connected to an

external motor (EXT models):

Connect the cooker hood to the

external motor using the connecting

cable and the 6-pole plug connector.

^ Separate fitting instructions are

supplied with the external motor.