360 Yield 360 Y-DROP JOHN DEERE 4930 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt rolniczy 360 Yield 360 Y-DROP JOHN DEERE 4930. 360 Yield 360 Y-DROP JOHN DEERE 4930 11 stron.

Drukuj stronę

INSTALL BREAKAWAY ASSEMBLY -

VI.

ONE PIECE

Figure 15

Step 1

Install breakaway assembly - one piece (1)

using the square U-bolts (2) and the extra

thick washer and Nylock nut. Repeat for

the remaining breakaway assemblies -

one piece.

Hardware Kit C

Figure 16

Figure 16 may show more or fewer mounts than

your installation. The alignment and quantity of the

mounts will depend on your row spacing.

Figure 17

Step 2

Install riser tube assembly (1) into the

breakaway assembly - one piece (2).

Step 3

Install pin (3).

Repeat Steps 2 and 3 for the remaining riser tube

assemblies.

NOTE: Included in most sprayer mount packages

are standard riser mounts to be used when primary

booms are folded and in transport mode. These

standard riser mounts should be mounted in

locations that allow you to relocate the drops away

from potential tire interference. See "Install Riser

Mounts Without Breakaway Assemblies" section on

next page for more instructions.

INSTRUCTIONS 360 Y-DROP

Figure 15

Figure 16

Figure 17

JOHN DEERE 4930/4940

360YIELDCENTER.COM