Miele DDG 102 Instrukcja obsługi i instalacji - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Okap wentylacyjny Miele DDG 102. Miele DDG 102 28 stron. External motor roof installation
Również dla Miele DDG 102: Instrukcja obsługi i instalacji (24 strony), Instrukcja instalacji (28 strony), Instrukcja instalacji (28 strony)

Drukuj stronę

DDG 102

This motor is designed to be installed on

angled tiled, pantiled, slate or shingle

roofs; the slope of the roof must be at

least 22° to prevent the ingress of rain or

snow.

Consult a roof tiler for advice regarding

other types of roofing.

This motor is not suitable for

installation on flat roofs.

Installation must only be carried out

by a qualified competent person.

The external motor is connected to the

cooker hood by means of a control

cable, and is operated by the control

panel on the cooker hood.

Please refer to the notes in

"Connection for air extraction",

before installing the external motor

and ducting.

The ducting stub on the motor unit has

a diameter of 125 mm when the

appliance is supplied.

^ If a diameter of 150 mm is required,

the front ring of the stub must be cut

off at the join with a sharp knife (see

illustration).

Installation