Miele PT 8257 WP Instrukcja obsługi i instalacji - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Suszarka Miele PT 8257 WP. Miele PT 8257 WP 36 stron.
Również dla Miele PT 8257 WP: Instrukcja obsługi (40 strony)
Drukuj stronęDisposal of packing materials
The packing materials are intended to protect the
machine from damage during shipping. They have
been selected for environmental compatibility and
efficient disposal and can therefore be recycled.
Returning packaging to the materials cycle saves raw
material and reduces waste. The packing materials
can be returned to your dealer.
,
Keep packing materials such as shrink wrap
and plastic bags away from children
because of the danger of suffocation.
Disposal of the appliance
Appliances may contain materials that can be
recycled. Please contact your local recycling
authority about the possibility of recycling these
materials.
Please make sure that you dispose of your old
appliance in accordance with regional disposal
regulations and prevent an uncontrolled release of
refrigerant into the environment.
Ensure that the appliance presents no danger to
children while being stored for disposal. Before
discarding an old appliance, unplug it from the outlet,
cut off its power cord, remove any doors to prevent
hazards. and store appliance on side to prevent
tipping. For more information see the "IMPORTANT
SAFETY INSTRUCTIONS".
Caring for the environment
Information on saving energy
You have purchased a heat pump dryer featuring the
latest technology. This dryer uses 50% less energy
than conventional dryers with electric heating. The
following tips will help you further lower your energy
consumption:
Wash your laundry on maximum spin cycle speed.
This will reduce drying time and energy consumption.
If the washing machine's last rinse cycle is with warm
water, a shorter drying time will be required due to
the lower residual moisture and the residual heat in
the laundry, which in turn saves energy.
Sort fabrics:
- by fiber/weave,
- by desired drying level,
- by residual moisture.
Only dry full loads, if possible. Under-loading is not
cost efficient. Overloading provides poor drying
results and has an adverse effect on fabrics. Optimal
energy consumption is relative to the total amount of
laundry.
A free lint filter and clean heat exchangers increase
the efficiency of the system and the drying process,
thereby reducing runtime and energy required.
Ensure sufficient room ventilation.
7