Miele PT 8301 SL Instrukcja obsługi - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Suszarka Miele PT 8301 SL. Miele PT 8301 SL 44 stron.
Również dla Miele PT 8301 SL: Instrukcja obsługi (28 strony), Krótka instrukcja obsługi (2 strony)
Drukuj stronę
Lowering the temperature
^ When drying delicate fabric (such as acrylic), press
the K Low temperature additional option button.
^ Press the START/STOP button.
The drying programme will begin.
The segment display will show the residual moisture
which is currently in the laundry until the programme
is finished.
!
Drying
L
Cooling down
O
Programme finished / Anti-crease
The programme sequence is displayed in three
stages. The stage the programme is at will be
highlighted in yellow.
At the end of the programme
At the end of the programme a buzzer will sound to
indicate that it has finished. " 0 " will appear in the
segment display.
This is followed by a cooling-down phase.
!
Drying
L
Cooling down
O
Programme finished / Anti-crease
If laundry is not removed as soon as the programme
finishes, the anti-crease phase will begin.
The drum will rotate at brief intervals to keep the
laundry from creasing.
After drying
At the end of the programme
^ Open the drum door.
If the door remains closed, the dryer will start up
again briefly after an interval of 30 minutes for
safety reasons.
^ Unload the drum.
Make sure nothing is left behind in the drum. If
items are left in the dryer, they could be damaged
by overdrying when the dryer is next used.
^ Check the fluff filter and clean it if necessary. Close
the fluff filter compartment flap to prevent anyone
tripping over it.
Interrupting a programme
The programme is interrupted by:
- pressing the mains On/Off switch s,
- opening the drum door,
- opening the fluff compartment flap.
To continue the programme:
Press the mains On/Off switch s, or close the drum
door or fluff compartment flap.
The target residual moisture level will flash in the
segment display, and a cooling-down phase will
follow the end of the programme.
^ Press the START/STOP button.
,
Do not unload laundry from the drum until after
the cooling down phase has been completed.
Hot laundry can self-ignite and cause a fire when
folded or put away.
Adding or removing items
The drum door can be opened during a drying
programme to remove or add items if necessary.
,
Always make sure that the drum is stationary
before reaching into the machine to remove
laundry. Reaching into a moving drum is extremely
dangerous.
To continue the drying programme:
^ Close the drum door.
The target residual moisture level will flash in the
segment display.
The fan will switch itself on automatically if the
temperature in the drum is too high.
^ Press the START/STOP button to continue the
programme.
If no more laundry is to be processed:
^ Close the drum door.
^ Switch the dryer off by pressing the mains On/Off
switch s
^ Switch off the on-site mains electricity switch.
Drying
11