Miele T 1565 C Instrukcja obsługi - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Suszarka Miele T 1565 C. Miele T 1565 C 28 stron.
Również dla Miele T 1565 C: Informacje techniczne (42 strony)
Drukuj stronę
To select a program
A program can only be selected
after the machine is turned on.
Set the desired program by turning
the program selector either clock-
wise or counterclockwise.
Press the "Start" button.
The program status will be stored for
30 minutes in the event of a power
failure.
The program is canceled if:
– There is a power failure lasting more
than 30 minutes.
– The program has already reached
the "Cooling down" or "Anti-crease"
stage.
Program selection
To change a program during
drying:
Set the program selector to the
desired program.
The new program will start from the be-
ginning.
The following tables (on the next two
pages), list the range of applications
for the different programs.
Correct procedure:
1
Press the "On/Off" button.
2
Press the "Door" button.
3
Open the door and load the drum.
4
Close the door with a firm swing - do
not push it shut.
5
Select "Low temp." and "Buzzer" if so
desired.
6
Select a program.
7
Press the "Start" button.
After the program has finished:
1
Set the program selector
to "Finish".
2
Remove the laundry.
3
Clean the lint filter.
4
Turn off the machine.
5
Empty the condensed water con-
tainer.
(Omit this step if the dryer has been
set up for external drainage of con-
densed water)
11