HP 260 G2 DM Podręcznik referencyjny sprzętu - Strona 26

Przeglądaj online lub pobierz pdf Podręcznik referencyjny sprzętu dla Pulpit HP 260 G2 DM. HP 260 G2 DM 33 stron. Desktop mini
Również dla HP 260 G2 DM: Instrukcje demontażu produktu po zakończeniu eksploatacji (15 strony)

Mounting the computer

HP recommends mounting the computer in the vertical (tower) orientation, with the power button up.

IMPORTANT:

This computer incorporates four mounting points on the bottom side of the computer. These mounting points

follow the VESA (Video Electronics Standards Association) standard, which provides industry-standard

mounting interfaces for Flat Displays (FDs), such as flat-panel monitors, flat displays, and flat TVs. The HP

Quick Release connects to the VESA-standard mounting points, allowing you to mount the computer in a

variety of orientations.

NOTE:

When mounting to the computer, use the 15 mm screws supplied with the HP Quick Release.

To use the HP Quick Release:

Remove four screws from the bottom side of the computer if they are installed.

Using four 15 mm screws included in the mounting device kit, attach one side of the HP Quick Release to

the computer as shown in the following illustration.

Chapter 2 Hardware upgrades

Do not mount the computer with the I/O ports oriented towards the ground.