HP 260 G2 DM Podręcznik referencyjny sprzętu - Strona 30
Przeglądaj online lub pobierz pdf Podręcznik referencyjny sprzętu dla Pulpit HP 260 G2 DM. HP 260 G2 DM 33 stron. Desktop mini
Również dla HP 260 G2 DM: Instrukcje demontażu produktu po zakończeniu eksploatacji (15 strony)
Drukuj stronę
B
Computer operating guidelines, routine
care and shipping preparation
Computer operating guidelines and routine care
Follow these guidelines to properly set up and care for the computer and monitor:
Keep the computer away from excessive moisture, direct sunlight, and extremes of heat and cold.
●
Operate the computer on a sturdy, level surface. Leave a 10.2-cm (4-inch) clearance on all vented sides
●
of the computer and above the monitor to permit the required airflow.
Never restrict the airflow into the computer by blocking any vents or air intakes. Do not place the
●
keyboard, with the keyboard feet down, directly against the front of the desktop unit as this also
restricts airflow.
Never operate the computer with the access panel or any of the expansion card slot covers removed.
●
Do not stack computers on top of each other or place computers so near each other that they are subject
●
to each other's re-circulated or preheated air.
If the computer is to be operated within a separate enclosure, intake and exhaust ventilation must be
●
provided on the enclosure, and the same operating guidelines listed above will still apply.
Keep liquids away from the computer and keyboard.
●
Never cover the ventilation slots on the monitor with any type of material.
●
Install or enable power management functions of the operating system or other software, including
●
sleep states.
Turn off the computer before you do either of the following:
●
Wipe the exterior of the computer with a soft, damp cloth as needed. Using cleaning products may
◦
discolor or damage the finish.
Occasionally clean the air vents on all vented sides of the computer. Lint, dust, and other foreign
◦
matter can block the vents and limit the airflow.
24