HP 3000 Series Podręcznik - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik dla Pulpit HP 3000 Series. HP 3000 Series 25 stron. 9x9 to k class conversion
Również dla HP 3000 Series: Instrukcja aktualizacji (19 strony), Podręcznik (20 strony), Instrukcja instalacji (42 strony)

Drukuj stronę

• Updating the HP 3000 system to the proper

release level and installing the SNA NRJE

software using AUTOINST. Refer to the

HP 3000 MPE/iX Installation and Update

Manual (36123-90001) for MPE/iX systems

or the HP 3000 Software Update Manual

(32033-90036) for MPE V systems.

• Verifying that all of the necessary software

modules have been successfully installed by

AUTOINST and are at the correct version

levels using the NMMAINT.PUB.SYS utility.

• Performing full system backups as neces-

sary and ensuring that the HP 3000 system

and personnel with HP 3000 system man-

agement knowledge are available when HP

is onsite to complete the INP card installa-

tion and minimum configuration of SNA

NRJE.

The customer is also responsible for

completing the configuration in order to fully

integrate SNA NRJE into the existing

customer network after HP has completed the

minimum configuration of the SNA NRJE.

HP Responsibility

Following the installation of SNA NRJE, HP is

responsible for the following:

• Confirming that all of the necessary soft-

ware modules have been installed and are at

the correct version level.

• Configuring the SNA NRJE product to a

minimum configuration (1 LU) in order to

verify software and hardware functionality.

• Verifying the SNA NRJE configuration by

issuing the NRJECONTROL START com-

mand and ensuring that the LU-to-LU ses-

sion becomes active.

These steps complete HP's portion of the

installation and minimum configuration of

SNA NRJE.

HP effort spent on problems that are not

caused by HP installation and configuration

activities is considered HP Consulting Support

and is billable to the customer at normal HP

time-and-materials rates.

System Environment

SNA NRJE/iX, SNA SDLC Link/iX, and

SNA/X.25 Link/iX are available on the HP

3000 Series 900 with currently supported

releases of the MPE XL or MPE/iX operating

system. SNA/Token Ring Link/iX requires

MPE/iX release 5.0 or later. SNA NRJE/V and

SNA Link/V are available on the HP 3000

Series 37-70 computers with the MPE V

operating system.

Documentation

The following documentation is for both SNA

NRJE/V and SNA NRJE/iX:

• 30292-61001 SNA NRJE User Programmer

Reference Manual

• 30292-61000 SNA NRJE Node Manager's

Guide

• J2220-61025 HP SNA Products Remote

System Configuration Guide

• 5958-8544 HP SNA Products: Job Entry

Subsystem (JES) Guide

HP 3000

Bus ness

Servers