Miele Dynamic U1 Instrukcja obsługi - Strona 16

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odkurzacz Miele Dynamic U1. Miele Dynamic U1 32 stron.
Również dla Miele Dynamic U1: Skrócona instrukcja obsługi (8 strony), Skrócona instrukcja obsługi (8 strony)

Drukuj stronę

Replacing the "Air Clean" filter (see

fig. 30, 31 + 32)

Do not use more than one filter at a

time.

^ Open the exhaust filter compartment

lid.

^ Remove the filter frame.

^ Open the filter frame and use one of

the two clean corners to remove the

used Air Clean filter.

^ Insert a new Air Clean filter.

If you wish to replace the Air Clean

filter with an ActiveAirClean 30 filter

or HEPA AirClean 30 filter see

"Maintenance and care -

Exchanging exhaust filters".

^ Close the filter frame and insert it

back into the compartment.

^ Close the exhaust filter compartment

lid.

Replacing the "ActiveAirClean 30"

filter and the "HEPA AirClean 30"

filter (see fig. 33)

Do not use more than one filter at a

time.

^ Open the exhaust filter compartment

lid.

^ Remove the exhaust filter.

^ Insert the new exhaust filter and

press the exhaust filter change

indicator ~ (see fig. 5).

^ After about 10-15 seconds, a small

red marker will appear in the left-

hand side of the display (see fig. 6).

^ Close the exhaust filter compartment

lid.

If you wish to use an Air Clean filter

see "Exchanging exhaust filters".

Exchanging exhaust filters

Depending on the model, your vacuum

cleaner will use one of the following

standard exhaust filters (see fig. 2):

a Air Clean

b ActiveAirClean 30 (black)

c HEPA AirClean (white)

If you wish, you can use one of the

alternative filters instead of the

standard filter supplied with your

appliance. Each filter offers different

characteristics (see section "Optional

accessories").

Important

1. If you replace exhaust filter a with

exhaust filter b or c, you must be sure

to remove the filter frame before

inserting the new filter type. The

exhaust filter change indicator must

also be activated (see fig. 5).

2. If you replace exhaust filter b or c

with exhaust filter a, be sure to place

the new filter in a filter frame *

(see fig. 31).

Do not use more than one filter at a

time.

* Filter frame - see "Optional accessories"