Miele HS15 Instrukcja obsługi - Strona 16

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odkurzacz Miele HS15. Miele HS15 32 stron. Vacuum cleaner
Również dla Miele HS15: Instrukcja obsługi (15 strony), Instrukcja obsługi (36 strony), Instrukcja obsługi (49 strony), Instrukcja obsługi (36 strony), Instrukcja obsługi (40 strony), Instrukcja obsługi (25 strony)

Drukuj stronę

^ Press the + button to select a higher

suction power level.

^ Press the - button to select a lower

suction power level.

Auto = suction power is automatically

adjusted for the type of floor

being vacuumed (dia. 22)

Do not use the "Auto" setting to

vacuum lightweight materials or

curtains. These could be sucked in

and possibly damaged.

Opening the air inlet valve (dia. 25 +

26)

(not on models with radio-controls on

the handle)

It is easy to reduce the suction power

for a short time, e.g. to prevent rugs or

other objects being sucked into the

vacuum cleaner.

^ Open the air inlet valve far enough to

reduce the suction power.

The floorhead will be easier to

manoeuvre. Close the valve when you

are ready to use full power again.

During vacuuming (dia. 27 + 28)

^ When vacuuming, pull the cleaner

behind you on its wheels. You can

stand it upright for vacuuming stairs

and curtains etc.

When vacuuming especially fine

dust, e.g. sawdust, sand, plaster,

flour, talcum powder etc.,

electrostatic charges build up

naturally. Under certain conditions

these charges will be released. To

avoid the unpleasant effects of

these discharges, a metal inlay has

been incorporated into the

underside of the handle. Please

make sure that you keep your hand

in constant contact with this metal

strip during vacuuming.

Pauses in use (dia. 24)

(for models with radio controls on the

handle)

To pause the vacuum cleaner during

operation:

^ Press the Stand-by button - on the

handle.

The Stand-by button is designed

to pause the vacuum cleaner for

short periods of time whilst

vacuuming. After vacuuming, the

vacuum cleaner must be switched

off and unplugged from the mains

electricity supply.

Otherwise there is a danger of

overheating and damage.

The LED will light up each time a button

is pressed on the handle.