Miele HS15 Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odkurzacz Miele HS15. Miele HS15 49 stron. Vacuum cleaner
Również dla Miele HS15: Instrukcja obsługi (32 strony), Instrukcja obsługi (15 strony), Instrukcja obsługi (36 strony), Instrukcja obsługi (36 strony), Instrukcja obsługi (40 strony), Instrukcja obsługi (25 strony)

Drukuj stronę

Do not use the SEB 217-3

Electrobrush to clean highly variable

or uneven floors. The brush might

come into contact with the floor and

cause damage.

Using the standard floorhead

Please observe the flooring

manufacturer's cleaning and care

instructions.

In addition to the Electrobrush a

standard floorhead is supplied with

your vacuum cleaner.

This floorhead can be used for all

normal cleaning of carpets, rugs and

hard flooring which is not susceptible to

scratching.

Miele offer a range of other floorheads,

brushes and accessories for other

types of flooring and special

requirements (see "Optional

accessories").

Attach the telescopic suction tube to

the floorhead (dia. 6)

^ Push the electro telescopic suction

tube into the floorhead and turn it

clockwise or anti-clockwise until it

clicks into position.

^ To release the floorhead from the

suction tube, press the release

button.

To adjust the standard floorhead

(dia. 7)

Vacuum carpets and rugs with the

brush retracted:

^ Press the % foot control.

Clean hard flooring which is not

susceptible to scratching, as well as

flooring with gaps or deep crevices in it

with the brush protruding:

^ Press the ) foot control.

To activate the exhaust filter change

indicator

Depending on model, your vacuum

cleaner will be fitted as standard with

one of the following exhaust filters (dia.

8):

b Active AirClean 50

c HEPA AirClean 50

^ Press the release catch for the dust

compartment lid and raise the lid as

far as it will go (dia. 9).

^ Remove the indicator strips (dia. 10).

^ Press the exhaust filter change

indicator ~ (dia. 11).

^ After approx. 10 - 15 seconds a thin

red stripe will appear in the left hand

side of the display (dia. 12).

^ Close the dust compartment lid

securely, making sure it clicks into

position. Take care not to trap the

dustbag when doing so.