Burk PlusConnect GatesAir ZXA Instrukcja instalacji i obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Nadajnik Burk PlusConnect GatesAir ZXA. Burk PlusConnect GatesAir ZXA 13 stron.

For the latest firmware updates, visit www.burk.com.

Installation

After entering the configuration settings, you are ready to install the PlusConnect in its permanent

location. Simply connect the PlusConnect unit to your LAN and power it on. The PlusConnect will

automatically begin reading data from the transmitter.

Now that the PlusConnect is installed on the network and connected to the transmitter, you are ready

to add the PlusConnect to the ARC Plus using AutoLoad Plus. AutoLoad Plus is included with the ARC

Plus, and may also be downloaded from www.burk.com.

Configuration involves:





Mapping PlusConnect parameters to unused ARC Plus channels

Adding the PlusConnect Unit to the ARC Plus Site

In order for the ARC Plus to recognize the PlusConnect, the PlusConnect must be added to the site:

1. Open AutoLoad Plus and connect to the ARC Plus site to which you are adding the

PlusConnect.

2. From the Edit menu, select Plus-X Devices to open the Plus-X device configuration dialog.

3. Click New... to add the PlusConnect to the site.

PlusConnect™ GatesAir ZXA Installation and Operation Manual

Adding a Plus-X device in AutoLoad Plus