Miele K 11820 SD Instrukcja obsługi i instalacji - Strona 20
Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Lodówka Miele K 11820 SD. Miele K 11820 SD 48 stron. Refrigerator with dynamiccooling
Również dla Miele K 11820 SD: Instrukcja obsługi i instalacji (44 strony), Instrukcja obsługi i instalacji (48 strony)
Drukuj stronę
Super cool and Dynamic cooling
Super cool
The Super cool function can be used to
rapidly reduce the temperature in the
refrigerator section to its lowest setting
(depending on the room temperature).
Switching on Super cool
Super cool is particularly
recommended for faster chilling of
large amounts of fresh food or drink.
^ Press the Super cool button. The
Super cool indicator light will come
on.
The appliance will then work at full
power to lower the temperature.
Switching off Super cool
The Super cool function will switch itself
off automatically after approx. 6 hours.
The indicator light will go out and the
appliance will run at normal power
again.
To save energy, the Super cool function
can be switched off once food and
drinks are sufficiently chilled.
^ Press the Super cool button. The
Super cool indicator light will go out,
and the appliance will continue to
operate at normal power.
20
Dynamic cooling m
When the Dynamic cooling function is
not switched on, the natural circulation
of air in the appliance will cause
different temperature zones in the
refrigerator as the cold, heavy air will
sink to the lowest section of the
appliance. You should bear this in mind
when placing food in the appliance
(see "Using the refrigerator efficiently").
However, if you are placing a large
amount of food in the refrigerator at any
one time, it is a good idea to switch on
Dynamic cooling. This way you can
distribute the temperature inside the
appliance to all areas more evenly so
that all the food will be chilled to about
the same degree.
The temperature is set as normal with
the temperature control.
Dynamic cooling should also be
selected when:
– the ambient temperature in the room
is high (above approx. 30 °C), and
– the room humidity level is high.
Switching on Dynamic cooling
^ Press the Dynamic cooling button
m. The Dynamic cooling indicator
light will come on.