Miele K 12020 S Instrukcja obsługi i instalacji - Strona 21

Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Lodówka Miele K 12020 S. Miele K 12020 S 44 stron.

The shelves can be adjusted according

to the height of the food.

^ Raise the shelf, and pull it forwards

slightly until the notch at the side is in

line with the shelf support. It can then

be raised or lowered to the required

level.

The raised edge at the back must face

upwards to prevent food from touching

the back of the appliance and freezing

to it.

Stoppers prevent the shelves from

being dislodged by mistake.

In order to accommodate tall items in

the appliance, one of the shelves is

divided. The front section can be

pushed under the rear section.

^ Push the rear half of the glass shelf

up slightly from below.

^ At the same time, pull the front half of

the glass shelf forwards slightly and

then push it carefully under the rear

half.

Adjusting the interior fittings

To move the split shelf:

^ Take both halves of the split glass

shelf out,

^ fit the two brackets onto the supports

on either side at the required height,

^ and push the glass shelves in one

after the other.

The shelf with the raised edge must

be at the back.

Adjusting the door shelf/bottle

shelf

^ Push the door/bottle shelf upwards,

then remove it by pulling it forwards.

^ Replace the door/bottle shelf at the

required position. Ensure that it is

securely pushed back into position.