Miele GAS COMBISET CS 1012 Instrukcje konwersji - Strona 7
Przeglądaj online lub pobierz pdf Instrukcje konwersji dla Płyta grzewcza Miele GAS COMBISET CS 1012. Miele GAS COMBISET CS 1012 40 stron. Double gas combiset
Również dla Miele GAS COMBISET CS 1012: Instrukcja obsługi i instalacji (44 strony), Instrukcja obsługi i instalacji (44 strony), Wymiary produktu (4 strony)
Drukuj stronę
Check the intake air
a Lock screw
b Air sleeve
Gap X must measure:
– ½" (13 mm) for natural gas
– ½" (13 mm) for LP (propane) gas
^ To adjust the gap, loosen the lock
screw and slide the air sleeve in or
out as necessary.
^ Tighten the lock screw.
^ Use sealant to secure the jets and
prevent loosening.
^ Reassemble the cooktop in reverse
order.
The flame must not go out on the lowest
setting, or when the control is turned
quickly from a high to a low setting.
On the highest setting the flame must
have a distinctive and visible core.
Converting CS 1011
Changing the needle valves
a Needle valve with small jet
b Needle valve with large jet
^ Using a small screwdriver, unscrew
the needle valves and remove them
with a pair of needle nose pliers.
^ Insert the new valves and screw them
in place.
^ Use sealant to secure the jets and
prevent loosening.
,
Check all fittings for gas leaks
before reassembling the cooktop.
7