Miele KM 2054 Instrukcja obsługi - Strona 32

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Płyta grzewcza Miele KM 2054. Miele KM 2054 44 stron. Gas cooktops

Installation

Preparing the worktop

^ Make the worktop cut-out following

the dimensions applicable.

Remember to maintain a minimum

safety clearance from the back wall,

as well as from any tall unit or side

wall to the right or left of the cooktop.

See "Safety clearances".

^ Seal the cut surfaces with a suitable

heat-resistant sealant to avoid

swelling caused by moisture.

If, during installation, you find that the

seals on the corners of the frame are

not flush with the worktop surface,

the corner radius (ß R4) can be

carefully scribed to fit.

Installing the cooktop

^ Feed the connection cable down

through the cut-out.

^ Place the cooktop in the cut-out

without securing it.

^ Connect the cooktop to the mains

(see "Electrical connection").

^ Connect the appliance to the gas

supply (see "Gas connection").

^ Secure the appliance using the

brackets a supplied.