Miele KM 362 G Instrukcja instalacji - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Płyta grzewcza Miele KM 362 G. Miele KM 362 G 28 stron. Gas-hobs
Również dla Miele KM 362 G: Instrukcja obsługi (32 strony), Instrukcja obsługi (28 strony), Instrukcja instalacji (24 strony), Instrukcja obsługi (28 strony), Instrukcja obsługi (40 strony), Instrukcja instalacji (28 strony)
Drukuj stronę
Warning and Safety instructions
Building in
Fit wall units and the cooker hood
before fitting the appliance, to avoid
damaging it.
The veneer or laminate coatings of
worktops (or adjacent kitchen
units) must be treated with 100 °C heat
resistant adhesive which will not
dissolve or distort.
The worktop upstand must be heat
resistant.
Ideally the hobs should be installed
with plenty of space on either side.
There may by a wall at the rear and a
wall or tall units at one side. On the
other side, however, no unit or divider
should stand higher than the hob.
This equipment is not designed for
maritime use or for use in mobile
installations such as caravans, aircraft
etc. However it may be suitable for
such usage subject to a risk
assessment of the installation being
carried out by a suitably qualified
engineer.
Due to the heat radiated by the hob
and to allow cooking fumes to
dissipate it is essential that a
minimum safety distance a of
100 mm is maintained between the
worktop cut-out and adjacent
kitchen units. There must be a
minimum safety distance of 50 mm
between the appliance and a back
wall.
4
recommended
not recommended
not allowed