Chroma CHCCRGBA Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt oświetleniowy Chroma CHCCRGBA. Chroma CHCCRGBA 14 stron. Battery powered led fixture

Drukuj stronę

Important Notice:

The use of an opto-splitter for DMX signal distribution is highly recommended when several fixture units (Color Punch, Color

Split, Color Force and Color Charge) are not plugged into the same power source.

2.3

Mounting

The Color Charge is designed primarily for floor mounting with an optional provision for truss mounting at the bottom of the

chassis. For truss mounting, we recommend the use of a ½"-13UNC x ¾" long bolt to avoid damage.

Note: Secure the fixture with a safety bond. A provision for a fixing hold is built into the chassis.

2.4

Power Switch

The Color Charge is equipped with an ON/OFF switch located at the side of the unit.

2.5

Battery

The Color Charge is charged through the male IEC connector. Charging a fully discharged Color Charge will take around 4

hours to complete (98-100%). The LCD display will light up when the unit is plugged into a power source. The display will

show the battery capacity in percentage.

Battery voltage, current and temperature can be monitored through the 'Information' menu. In this menu, a fully charged

battery will show voltage (BatV) – 14.1 - 14.9V, current (BatI) – 0.0A, and battery temperature (BatT) 23 º C - 25 º C not

charging / 23 º C - 40 º C when charging.

The Color Charge wireless reception/transmission and light output will shut down when battery life is at 2%.

2.6

Control

The Color Charge can operate as a stand-alone unit or controlled remotely wired or wireless via ANSI E1.11 USITT DMX 512-

A signal protocol. The control functions can be accessed through the LCD display on one side of the fixture with 4 push

buttons.

Push button operation:

Figure 1

Charging Display:

The Color Charge display will show the battery capacity (%), the word 'CHARGE', control mode, DMX status, and DMX

address.

Color Charge User Manual

Control

Function

Exit

Back to previous menu

Up Arrow

Increases (+) the mode level or value

Down Arrow

Decreases (-) the mode level or value

Back Arrow

(Enter) Stores the menu choice

www.chroma-q.com

V1.4 September 2012