Miele KM 406 Instrukcja instalacji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Płyta grzewcza Miele KM 406. Miele KM 406 40 stron. Gas cooktop
Również dla Miele KM 406: Instrukcja obsługi (20 strony), Podręcznik wymiarów (1 strony), Instrukcja instalacji (20 strony), Instrukcja instalacji (40 strony), Instrukcja obsługi (28 strony), Instrukcja obsługi (24 strony), Instrukcja obsługi (20 strony), Instrukcja instalacji (28 strony), Instrukcja instalacji (20 strony)

Warning and Safety instructions

Fit wall units and the cooker hood

before fitting the appliance, to avoid

damaging it.

As a minimum 20 m

required where the appliance is

installed, and a door or window which

can be opened to the outside air.

The veneer or laminate coatings of

worktops (or adjacent kitchen

units) must be treated with 100 °C heat

resistant adhesive which will not

dissolve or distort.

The worktop upstand must be heat

resistant.

Ideally the hobs should be installed

with plenty of space on either side.

There may by a wall at the rear and a

wall or tall units at one side. On the

other side, however, no unit or divider

should stand higher than the hob.

Due to the heat radiated by the hob

and to allow cooking fumes to

dissipate it is essential that a

minimum safety distance a is

maintained between the worktop

cut-out and adjacent kitchen units,

e.g. a tall unit, as follows:

100 mm with KM 404 / KM 405

250 mm with KM 406

200 mm with KM 414 / KM 417

There must be a minimum safety

distance of 50 mm between the

appliance and a back wall.

space is

recommended

not recommended

not allowed