Miele Km 424 Instrukcja obsługi - Strona 19

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Płyta grzewcza Miele Km 424. Miele Km 424 24 stron. Ceramic cooktops
Również dla Miele Km 424: Instrukcja obsługi (24 strony), Instrukcja instalacji (12 strony), Instrukcja instalacji (12 strony), Instrukcja obsługi (24 strony)

Drukuj stronę

1. Turning on and off

Do not use a steam cleaner to clean

this appliance. Steam could

penetrate electrical components and

cause a short circuit. Pressurized

steam could cause permanent

damage to the surface and to

components for which the

manufacturer cannot accept

responsibility.

Do not use any sharp pointed

objects which could damage the

seal between the ceramic surface,

the surrounding frame and the

countertop.

Never use abrasive or caustic (oven)

cleaners, dishwasher detergent,

scouring pads, steel wool or hard

brushes. They will damage the

surface.

The ceramic surface can be cleaned

using a cleaner for ceramic

surfaces. Follow the manufacturer's

instructions.

Make sure that no cleaner residue

remains on the ceramic surface by

carefully wiping the cooktop with a

damp cloth. They may damage the

cooktop or produce toxic fumes

when heated.

Be sure that pot and pan bases are

clean and dry.

After cleaning, dry the ceramic

surface with a soft cloth to prevent a

build up of limescale deposits.

Cleaning and Care

Clean any spills immediately before

they become difficult to remove.

Clean the appliance regularly,

preferably after each use. Allow the

appliance to cool before cleaning.

^ Wipe off any soiling using a damp

cloth. Stubborn soiling is best

removed with a shielded scraper

blade.

^ Apply a ceramic cleaner using a soft

cloth or paper towel. To remove any

limescale deposits or metallic residue

apply a ceramic cleaner using a soft

cloth and a shielded scraper blade if

necessary.

^ After cleaning wipe the ceramic

surface with a damp cloth and dry.

A cleaner with a special additive to

prevent water marks and smears on the

ceramic surface may be used.

Any melted solids like sugar, plastic or

aluminum foil should be removed as

soon as possible, while the burner is

still warm. If they are allowed to harden

the cooktop may become pitted.