Chroma Color Force 12 Podręcznik użytkownika - Strona 8
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt oświetleniowy Chroma Color Force 12. Chroma Color Force 12 17 stron. Color force 12
Również dla Chroma Color Force 12: Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony)
Drukuj stronę
3 channel RGB + 1 intensity channel (Red, Green, Blue with Magic Amber and Intensity) gives 3 control channels directly
affecting the intensity of the corresponding LED – Red, Green, Blue with *Magic Amber, and 1 channel affecting the intensity of
all RGB(A) channels.
4 channel RGBA (Red, Green, Blue and Amber) gives 4 control channels directly affecting the intensity of the corresponding LED
– Red, Green, Blue and Amber. Colour is mixed by adjusting the levels of each of the four colours. White is achieved with all
channels at full.
3 channel RGB (Red, Green, Blue with *Magic Amber) + 1 intensity channel + 1 intensity effects channel gives a channel for
intensity effects, 3 channels directly affecting the intensity of the corresponding LED – Red, Green, Blue and 1 channel affecting
the intensity of all sRGB channels.
4 channel RGBA (Red, Green, Blue, Amber) + 1 intensity effects channel gives a channel for intensity effects and 4 channels
directly affecting the intensity of the corresponding LED – Red, Green, Blue, Amber.
3 channel HSI (Hue, Saturation and Intensity) + 4 effects channels gives 2 colour channels for hue and saturation, separate
intensity channel and 4 channels for effects (Colour Speed, Range, Step and Intensity Effects).
Grouping options: grouping by individual cell "Duo" and "All" cells. A Color Force 12 fixture consists of 2 cells. Cell grouping
"Duo" allows individual control of each single cell. In "All" grouping, both cells can be controlled as 1 group.
Internal FX engine: mode 1, 5 and 6 incorporate internal FX engine with variable parameters to create an unlimited amount of
unique lighting effects. (see 2.6 DMX Protocol for list of parameters) All internal FX are referenced back to the base HSI colour
and intensity levels.
*Magic Amber is the term used for the unit's ability to bring in amber when mixing colours that require it.
Control Menu
1.
From the Home/Main Menu position, press the Up or Down arrows to scroll through the control menu positions.
2.
Press Enter to save.
3.
Press Exit to exit without saving.
Main Menu / DMX Address
To set the DMX start address,
Press Enter, then press Up/Down buttons to adjust DMX start address,
Press Enter for 2 seconds to save settings and the display goes back to Home.
Control Mode
The Color Force 12 can be set to operate in 11 DMX controlled modes and 2 standalone modes. 2 grouping options
are available cell-grouped ("Duo), all-grouped ("All") with 5 control options: fxHSI, HSI, RGB (with Magic Amber),
RGBA, RGBI (with Magic Amber), pre-programmed looks and stand-alone effects.
Refer to the list below for details.
Press the Up/Down buttons to access the "Control Mode",
Press Up/Down to select the mode and press Enter for 2 seconds to save the settings.
Color Force 12 User Manual
www.chroma-q.com
7
V1.8 August 2014