Allnet ALL168207 Podręcznik szybkiej konfiguracji - Strona 10
Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Adapter Allnet ALL168207. Allnet ALL168207 12 stron. Coaxial network adapter
Drukuj stronęALL168207 Coaxial Network Adapter
LEDs
Power
COAX/ACT
ETH/ACT
*1 : The "Power" LED indicator will blink in standby mode. It will get into standby mode, if you plug the
device to outlet and no Ethernet link detected after booted and 60 second later. If you unplug the
Ethernet cable, it will get into standby mode after 60 seconds. Under standby mode, COAX/ACT
and ETH/ACT LEDs will both be off.
© 2008. All rights reserved.
On: Power on
Blinking: Standby mode (*1)
Off: Power off
On: Coaxial Link detected and no traffic
Blinking: Coaxial traffic detected
Green: The Coaxial connection quality is good
Orange: The Coaxial connection quality is fair
Red: The Coaxial connection quality is bad
Off: No Coaxial Link detected
On: Ethernet Link Detected
Blinking: Ethernet traffic detected
Off: No Ethernet Link detected
Page 10