Bürkert 8020 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe Bürkert 8020. Bürkert 8020 10 stron. Flowmeter with paddle wheel

Drukuj stronę
8.

MAINTENANCE

Safety instructions
DANGER
Risk of injury due to electrical voltage.
▶ Shut down and isolate the electrical power source before
carrying out work on the system.
▶ Observe all applicable accident protection and safety
regulations for electrical equipment.
Risk of injury due to high pressure in the installation.
▶ Stop the circulation of fluid, cut off the pressure and
drain the pipe before loosening the process connections.
Risk of injury due to high fluid temperatures.
▶ Use safety gloves to handle the device.
▶ Stop the circulation of fluid, and drain the pipe before
loosening the process connections.
▶ Keep all easily flammable material and fluid away from
the device.
English
32
Cleaning the flow sensor
NOTE
The flow sensor may be damaged by the cleaning
liquid.
▶ Use a cleaning product that is compatible with the materi-
als the flow sensor is made of.
▶ Do not use any abrasive acting materials.
NOTE
After cleaning the flow sensor:
▶ Rinse the flow sensor.
▶ Check the seal and replace it if necessary.
English
34
DANGER
Risk of injury due to the nature of the fluid.
▶ Respect the prevailing regulations on accident prevention
and safety relating to the use of aggressive fluids.
WARNING
Risk of injury due to non-conforming maintenance.
▶ Maintenance must only be carried out by qualified and
skilled staff with the appropriate tools.
▶ Ensure that the restart of the installation is controlled
after any interventions.
Cleaning
NOTE
The device may be damaged by the cleaning liquid.
▶ Clean the device with a cloth slightly dampened with
water or a cleaning liquid compatible with the materials
the device is made of.
9.

ACCESSORIES

CAUTION
Risk of injury and/or damage caused by the use of
unsuitable parts.
Incorrect accessories and unsuitable spare parts may
cause injuries and damage the device and the sur-
rounding area.
▶ Use only original accessories and original spare parts
from Bürkert.
Accessories
Female connector with cable gland
(type 2508)
Female connector (type 2509) with
NPT 1/2'' reduction, without cable gland
Set with seals (1 FKM + 1 EPDM)
English
33
33
Order code
438 811
162 673
552 111
English
35
35