365SMART SM-02-02900 Podręcznik - Strona 11
Przeglądaj online lub pobierz pdf Podręcznik dla Sander 365SMART SM-02-02900. 365SMART SM-02-02900 20 stron. Drywall sander
Drukuj stronęCAUTION!
INFORMATION ON VIBRATIONS AND NOISE
• The vibration value and measurement uncertainty
were determined in accordance with EN 60745-1 and
are given in the table.
• The noise emission was determined in accordance
with EN 60745-1, the values are given above in the
table.
• The declared maximum vibration and noise levels
were measured using a standard method during
device testing.
WARNING:
• Vibration emissions during actual use of the power
tool may differ from the declared value depending
on how the tool is used.
• Take appropriate measures to protect against
vibration exposure! The entire work process must be
taken into account, including times when the
product is running with no load or is switched off!
• Proper measures include regular maintenance and
care of the product and application tools, keeping
hands warm, periodic breaks and proper planning of
work processes!
3. SYMBOLS
The rating plate on the device may contain
symbols. They present important information about
the product or instructions for its use.
3.
4. ENVIRONMENTAL PROTECTION
Waste electrical appliances are secondary
raw materials and must not be disposed of in
household waste bins as they contain
substances hazardous to health and the
environment. Please help us to conserve
natural
resources
environment
appliances to a collection point for used
appliances.
Read the instructions carefully
before using the device.
Use appropriate protective
equipment.
and
protect
by
donating
your
used
EN
5. GENERAL SAFETY RULES
Workplace safety
• The work station should be kept clean and well lit.
Disorder or insufficient lighting can cause accidents.
• Do not use power tools in explosive atmospheres
with flammable liquids, gases or vapours. During
operation, the power tool generates sparks that can
cause an explosion.
• Children and bystanders should not be allowed to
enter the workplace. Lack of concentration may result
in loss of control of the device.
Electric safety
• The power tool plug must fit into the power outlet. It
is forbidden to modify the plug, use any adapters in
order to adapt the plug to the socket. An unmodified
plug reduces the risk of electric shock.
• Avoid contact with earthed surfaces such as pipes,
radiators or refrigerators. The risk of electric shock
increases when the user's body is earthed.
• Avoid contact with precipitation or moisture. Water
and moisture in the device increase the risk of electric
shock.
• Do not overload the power cord. Do not use the
power tool while holding the cable; do not use the
cable to hang the device, and do not pull out the plug
by pulling the cable. Protect the cable from high
temperatures, oils and sharp edges. Damage to the
cable increases the risk of electric shock.
• For outdoor use. Use extension cords designed for use
outdoors. Using a suitable extension cord reduces the
risk of electric shock.
• In case of operation in a humid environment, use a
residual current circuit breaker to reduce the risk of
electric shock.
Safety of persons
• Exercise caution when working. Be careful and
cautious in all actions. Do not start work when you
are tired, under the influence of drugs, alcohol or
medicines. A moment of inattention can cause
serious injuries.
the
11