ALLNIC AUDIO 25th Anniversary T-2000 Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz ALLNIC AUDIO 25th Anniversary T-2000. ALLNIC AUDIO 25th Anniversary T-2000 16 stron. Stereo integrated amplifier
Drukuj stronę
fewer windings than other designs can provide and results in the great benefit of an extremely wide
range of output frequencies.
• "Soft-start" Circuitry. Allnic uses soft start circuitry that, after sufficient warm-up only, provides the
high voltage supply to the plate of each tube. This protective design results in prolonged tube life and
fewer and less frequent issues with tube performance.
• Analog Power Tube Current Monitors. In order to provide constant current (bias) monitoring for the
power tubes, Allnic uses a separate analogue current meter for each tube. The meters make it
exceptionally easy to see the status of each tube at any time and to respond immediately to any
variation in bias by use of the bias control knob for the relevant tube. The meters offer a simple,
unambiguous indication of each tube's status compared to conventional LED bias monitors.
• "On-the-Fly" Triode/Pentode Switching. Switching between triode and pentode operation can be done
"on-the-fly" at any time while the amplifier is in use.
• Beautiful 10KHz square wave response. See Figures 1-3.
• As are all Allnic Audio products, the T-2000 25
Substances regulation) compliant in construction and materials.
WHAT'S IN THE BOX?
Please check that the shipping box contains the following:
• One (1) Allnic T-2000 25
• One (1) Allnic remote control
• One (1) Allen wrench for screws on top of the tube chimneys
• One (1) IEC type power cord
• One (1) Owner's Manual
Note:
1)
The T-2000 25th Anniversary ships with the tubes installed.
The T-2000 25th Anniversary will work with most IEC type aftermarket power cords. The Allnic
2)
ZL-3000 and ZL-5000 power cables will make an excellent match. Of course, only you can
determine the power cord that works most synergistically with the T-2000 25th Anniversary in
your system.
3)
Be sure the T-2000 25th Anniversary is labeled for the AC voltage of your location. If it is not,
please contact your Allnic Audio dealer.
We advise that you keep the boxes and other packing materials that your T-2000 25
came in. It will be useful if you sell your T-2000 25
ship it for service.
Anniversary is fully RoHS (EU Reduction of Hazardous
th
Anniversary stereo integrated amplifier
th
Anniversary or in the unlikely event you need to
th
5
th
Anniversary