ALLNIC AUDIO H?1500 II PLUS PHONO STAGE Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz ALLNIC AUDIO H?1500 II PLUS PHONO STAGE. ALLNIC AUDIO H?1500 II PLUS PHONO STAGE 12 stron. Phono stage
Drukuj stronę
But LCR RIAA units have drawbacks as well.
These drawbacks are high cost and the
difficulty of impedance matching; the latter
has been the primary hindrance to the
commercialization of this superb method in
the construction of phono stage amplifiers.
However, Allnic Audio manufactures a high
quality LCR RIAA unit and has developed a
600 ohms impedance matching method.
•
For superior signal to noise ratios, the H‐1500
II PLUS is equipped with pure vacuum tube,
high voltage regulation for each channel and
a power supply unit separate from the phono
stage itself.
•
High quality MC Step‐up Transformers with
Permalloy cores are used for the H‐1500 II
PLUS's dual MC inputs.
•
New vacuum tube damping technology – Allnic
Audio's patented "Absorb GEL tube damper"
technology prevents harmful vibrations from
reaching the signal / gain tubes and, therefore,
prevents micro‐phonic noise propagation in the
tubes. The Allnic Audio Absorb Gel damper
technology effectively solves a problem that
plagues most tube amplification systems.
Provided other tube components do not
introduce micro‐phonic noise into your system,
with the Absorb Gel damping system, you will
enjoy a degree of transparent sound that will
surprise and please you.
•
Pure Class A operation
•
As are all Allnic Audio products, the H‐1500 II
PLUS is fully RoHS (EU Reduction of Hazardous
Substances regulation) compliant in
construction and materials
WHAT'S IN THE BOX?
Please check that the shipping box contains the
following:
•
One (1) Allnic H‐1500 II PLUS phono stage –
in natural aluminum or black, depending on
your order specification
•
One (1) Power Supply for H‐1500 II/H‐3000
in natural aluminum or black, depending on
your order specification
•
One (1) power umbilical cord
•
One (1) IEC type power cord
•
One (1) Owner's Manual
Note:
1)
The H‐1500 II PLUS and its power supply ship with
the tubes installed.
2)
The H‐1500 II PLUS power supply will work with
most IEC type aftermarket power cords. Of
course, only you can determine the power cord
that works most synergistically with the H‐1500 II
PLUS in your system.
3)
Be sure the H‐1500 II PLUS power supply unit is
labeled for the AC voltage of your location. If it is
not, please contact Hammertone Audio.
We advise that you keep the boxes and other packing
materials that your H‐1500 II PLUS came in. It will be
useful if you sell your H‐1500 II PLUS or in the unlikely
event you need to ship it or the power supply for
service.
SAFETY
•
Disconnect the power cord by pulling the
plug, not the cable.
•
Do not attempt any repairs. Do not remove
the units' chassis covers without specific
authorization from Hammertone Audio.
•
Keep the power cords away from heat sources
•
Keep the units away from liquids – do not
allow any liquid to enter the interior of the
units.
•
When the units are moved from a cold to a warm
environment, allow sufficient time for any
condensation to evaporate in both units before
plugging the power supply unit into an AC
connection.
•
Do not attempt any repairs.
•
Do not remove the units' chassis covers without
specific authorization from Hammertone Audio.
•
See the notes on "Location, Location, Location".
CLEANING
A. Chassis
Use only a soft, lint‐free cloth dampened slightly with
5