DIAL CP-M S-36LH-110-230 Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pompa wodna DIAL CP-M S-36LH-110-230. DIAL CP-M S-36LH-110-230 5 stron. Condensate pump

⑤ Anti-vibration assembly.

⑥ Note direction of water flow.

⑦ Connect the 9mm o/d x 6mm i/d tube from the reservoir to the pump.

Ensure the length of the tube is less than 2 meters (6.5ft) and secure with

cable ties.

⑧ Connect your 9mm o/d x 6mm i/d vinyl discharge tube to the outlet barb on

the pump and secure with a cable tie. Direct discharge tube to a proper

drainage outlet. Ensure discharge tube does not have kinks or constrictions.

-05-

⑨ A high-level alarm switch should be wired into the air conditioning signal

wire, to stop the operation of the air conditioning unit in the event of a pump

failure.

N.C.

Indoor unit

COM

N.O.

Alarm/Volt Free

Condensate pump

L N E

CAUTION

Use the wiring diagram above to ensure correct wiring connection.

⑩ Test pump operation by pouring water into evaporator tray. Check for leaks.

Outdoor unit

L N E

-06-