ALLO PRI Gateway and Elastix Server Instrukcja konfiguracji - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja konfiguracji dla Serwer ALLO PRI Gateway and Elastix Server. ALLO PRI Gateway and Elastix Server 12 stron.

Drukuj stronę

10. Click on "Submit" at the end of the page and Apply changes. Once we have

configured the main parameters for SIP communication to Allo Gateway in Elastix,

we‟ll create an extension for an IP Phone. Go to "PBX => PBX Configuration =>

Extensions" and click on "Submit" having the "Generic SIP Device" option

selected. (Figure 4-7)

11. Fill in the following information on the Add SIP Extension page:

• User Extension (302 in this example)

• Display Name ("IPPhone" in this example)

• secret ("h7Dka3Rf9si0t" in this example)

12. Click on "Submit" at the end of the page and Apply changes. To register the Allo

PRI Gateway with Elastix, you will need to enter the information from the trunk

created on the Elastix Server into the gateway by logging into the Allo PRI

Gateway‟s WebUI.

Go to the gateway‟s WebUI by pointing your browser to the Allo PRI Gateway‟s IP

address (Figure 4-9).

Allo PRI Gateway Server Setup Guide

Figure 4-7. Add SIP Extension

Figure 4-8. Add SIP Extension

PaloSanto Solutions