Burkert 0142 Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Jednostka sterująca Burkert 0142. Burkert 0142 14 stron. Magnetventil 2/2-way solenoid valve
Drukuj stronę
6.2
Before installation
Installation position: any, actuator preferably upwards.
Procedure:
→
Check pipelines for dirt and clean.
→
Install a dirt filter before the valve inlet (≤ 500 µm).
6.3
Installation
Insert O-ring
Insert
Tighten union nut - evenly
by hand only
NOTE!
Caution risk of breakage!
• Do not use the coil as a lifting arm.
→
Body with welded sleeve: Use PVDF.
→
Body with bonded sleeves: Use Tangit special adhesive.
Valve body must not be installed under tension.
→
Observe direction of flow:
The arrow on the body indicates the direction of flow (no
function in opposite flow direction).