Allo RemoteControl NICE HSCU2W Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pilot zdalnego sterowania Allo RemoteControl NICE HSCU2W. Allo RemoteControl NICE HSCU2W 8 stron.
Drukuj stronę
Connections on the HSSOC siren:
To connect the siren with the control panel, refer to Table 4 and figure 27A if the inputs are set as N.C. or
27B if the inputs are set as balanced
Telephone line connection:
Connect the phone line to connector (b) on the control panel, see fig. 6A and 6B on page 11. * Note (fig.
23 and 24) - The adapters are not included. In case of other devices connected to the telephone line,
follow the order specified in fig. 23. Important! – If an ADSL is used, a special filter must be used (not
provided), which must be installed between the telephone socket and the control panel, see fig. 24.
Visit our website: www.Alloremotecontrol.com